Do you have questions?
Call us
+49 (0) 8671 - 92652-0
We will advise you gladly!
Or send us
an email:
service@esterer-giesserei.de
Material | Material.-Nr. |
| Hardness | Special features and properties / Application Note |
GJN-HV600(XCr14) | EN-JN2060 | ca. 35 - 40 | 55 - 60 | Cladding, baffles; good wear resistance against abrasion; usable at higher impact load |
G-X220Cr15 | - | |||
GJN-HV600(XCr14) | EN-JN2060 | ca. 39 - 45 | 55 - 63 | Trim parts, mixer blades; good wear resistance against abrasion; suitable for moderate impact load |
G-X280Cr15 | 0.9640 | |||
GJN-HV600(XCr18) | EN-JN3039 | ca. 35 - 45 | 55 - 63 | Pump housing, grinding track segments, lining parts; higher wear resistance to abrasion; suitable for moderate impact load |
G-X280C20 | 0.9645 | |||
GJN-HV600 | EN-JN2049 | ca. 40 - 45 | 58 - 64 | Trim parts, mixer blades; higher wear resistance to abrasion; suitable for moderate impact load |
G-X320CrNiSi9-5-2 | 0.9630 | |||
GJN-HV600(XCr23) | EN-JN3049 | ca. 45 - 55 | 60 - 65 | Rackets, baffles, trim parts; higher wear resistance to abrasion; usable at low impact load |
G-X330CrMo27-1 | 0.9655 | |||
EJN-HV600(XCr14) | EN-JN2060 | ca. 45 - 55 | 60 - 65 | Trim parts, mixer blades; higher wear resistance to abrasion; usable at low impact load |
G-X280CrMo15-1 | 0.9635 | |||
G-X210Cr12 | 1.2080 | annealed hardened | 250 HB 60 - 64 | Heavy-duty cutting and punching tools, drawing dies and dome, knife jaws, head stamps; good wear resistance with good toughness; usable at higher impact load |
G-X350CrNi4-2 | - | not curable ca. 48 - 62 | - | Trim parts, mixer blades; good wear resistance against abrasion; suitable for moderate impact load |
GJN-HV600(XCr14) | EN-JN2060 | ca. 45 - 55 | 60 - 65 | Grinding segments, lining parts; good wear resistance against abrasion; suitable for moderate impact load |
G-X300CrMo15-3 | 0.9635 | |||
GJN-HV550 | EN-JN2039 | not curable ca. 50 - 65 | - | Auskleidungsteile, Mischerschaufeln; guter Verschleißwiderstand gegen Abrasion; verwendbar bei mäßiger Schlagbeanspruchung |
G-X300NiCr4-2 | 0.9625 | |||
G-X400Cr30 | - | ca. 50 - 55 | 55 - 65 | Lining parts, mixer blades; good wear resistance against abrasion; suitable for moderate impact load |
GJN-HV600(XCr18) | EN-JN3039 | ca. 35 - 45 | 55 - 63 | Pump housings, grinding track segments, lining parts; good wear resistance against abrasion; suitable for moderate impact load |
G-X-280CrMo20 | - | |||
GJN-HV600(XCr14) | EN-JN2060 | ca. 45 - 55 | 60 - 65 | Lining parts, mixer blades; higher wear resistance to abrasion; suitable for moderate impact load |
G-X240CrMoCu15 | - | |||
GJN-HV600(XCr23) | EN-JN3049 | ca. 45 - 55 | 60 - 65 | Lining parts- mixer bottoms, baffle plates; higher wear resistance against abrasion; suitable for moderate impact load |
G-X260CrMo24-2 | - | |||
GJN-HV520 | EN-JN2029 | not curable >50 | n/a | Mixer blades, lining parts; good wear resistance against abrasion; suitable for moderate impact load |
G-X260NiCr4-2 | 0.9620 | |||
GJN-X250CrNiSi14-2-2 | n/a | n/a | n/a | Sliding grid, inlay grate |
G-X250CrNiSi14-2-2 | n/a |
Material | Material-Nr. | HRc cast state | Special features and properties / Application Note |
EN-GJL-250 mit 1% Cr | not standardized | >35 | - |
EN-GJL-250 mit 1,5% Cr | >35 | - | |
EN-GJL-250 mit 2% Cr | >40 | - | |
EN-GJL-250 mit 3% Cr | >45 | - | |
EN-GJL250 mit 5% Cr | >45 | - |
The mechanical values were taken from the current literature.
These values are to be understood as reference values and are therefore not guaranteed properties.
Other materials on request
Reference: | |
Werkstoff 1.2080 aus Stahlschlüssel Ausgabe 2007, Herausgeber Verlag; Stahlschlüssel Wegst GmbH | |
Taschenbuch der Gießereipraxis Ausgabe 2007, Herausgeber Schiele und Schön | |
PDF-download of the material lists "chilled cast iron an white cast iron"...
Errors and omissions excepted.
Call us
+49 (0) 8671 - 92652-0
We will advise you gladly!
Or send us
an email:
service@esterer-giesserei.de